Edge Card Connectors.

Technical questions about any Commodore computer, peripheral, or related issue.
Post Reply
BeachPET
Posts: 5
Joined: Fri Mar 23, 2012 8:17 pm
Location: Central NY

Edge Card Connectors.

Post by BeachPET » Mon Apr 23, 2012 8:19 am

Does anyone have part numbers for the edge card connectors to the IEEE and the Expansion ports for the main pcb on the PET.

I dont have any literature for the contact spacing and board thickness to look them up by. Im sure someone knows of TRW or simular components that have a part # I can obtain some by.

Thanks a bunch.

mark

User avatar
dsokoloski
Posts: 6
Joined: Sat Jan 19, 2013 1:23 pm
Location: Toronto

Re: Edge Card Connectors.

Post by dsokoloski » Sat Jan 19, 2013 2:32 pm

Mark,

The part number is 50-24S-30 made by Cinch Connectors. Unfortunately, they are no longer being manufactured. The spacing and dimensions can be found here:

http://www.cinch.com/products/misc-comm ... 56-density

The good news is that you can buy them for US$3.00 at Jim Brain:

http://store.go4retro.com/12-24-156-edge-connector/

Don't buy them all though! I am just about to place an order for some too ;)
Attachments
edge-connector-156.gif
Cinch 0.156 Edge Connector Dimentions
edge-connector-156.gif (10.54 KiB) Viewed 3041 times
Cheers,
Darryl

Post Reply