Page 1 of 1

SuperPet ports

Posted: Fri Nov 25, 2011 4:39 pm
by jayskay
I have inherited a Commodore SuperPet and am no too sure about the inside of it. When I flipped it open, I noticed some alligator jumper cables/cips partially connected to what I suspect is a serial port. There are two pairs of clips; one appears connected to pins 7? (red) and 8? (black) while the other connects pin 9? (red) to some other pin. The port identity reads

ITT DBP-255CA 8046 and it appears to look like the following.....

O___O O__________________________O (open)
13 12 11 10 9 8 7 6 5 4 3 2 1
I I I I I I I I I I I I I
I I I I I I I I I I I I
25 24 23 22 21 20 19 18 17 16 15 14

Is there anybody out there who knows how to connect this port properly ?

John

Re: SuperPet ports

Posted: Sat Nov 26, 2011 11:11 pm
by sjgray
The SuperPET does have an internal RS-232 port with DB-25 connector. It was designed to connect the SuperPET to a mainframe or modem. It's possible the previous owner had some type of add-on installed or was doing some diagnostics. It is safe to remove those wires.... they are not required for normal operation.

Steve

Re: SuperPet ports

Posted: Tue Jan 17, 2012 10:02 am
by jayskay
Thanks Steve. Will remove the clips then and not be too concerned about doing so. Appreciate the time taken to help me out with this.

John